Respiratory Devices

Flexi Mask® (GS-2020)

Product Name: Flexi mask®

Generic: Oxygen Mask

Product Code: GS-2020

Product Category: Anesthesia

Flexi Mask is designed for convenient oxygen therapy.

Moulded face mask is manufactured from non-toxic, non irritant medical grade PVC.

Provided with adjustable elastic strap for proper positioning of mask on the nasal area.

Swivel connector for convenience of attachment to the oxygen tube.

210 cm. (7ft) multichannel tube is provided to ensure continuous flow of oxygen.

Proximal end of tube is fitted with soft funnel shape connector for easy connection to oxygen source.

Non-sterile, individually packed in poly bag.
Item Code: GS-2020 Learn More

Neb-Mask – Nebuliser Mask Kit

Disposable nebulizer mask with chamberAndtube for nebulization

with the help of a nebuliser machine.

Features and Benefits:

Soft kink resistant star lumen anti-crush tube length 200 cm.

Soft, large, anatomical shaped face mask fit comfortably over the patient face.

Nose clip for easy adjustment over the patient nose.

Strip to secure the mask one patient face.

Transparent graduated chamber with a capacity of 6ml and over-limit of 4ml.

FastAndefficient generation.
Item Code: AR1001 Learn More

Medical Regulator Instruction

Medical Regulator is Used for Oxygen breathing in the hospital.

Mainly function:

Oxygen flow range: 1–15 L/min

Pressure reducing range: 2.0~3.0 kg

Relief valve pressure range: (3.5 kg ±0.5 kg)

Input Pressure: 2175 psi

Output Pressure: 29 – 43.5 psi

Include:

Oxygen Regulator

Humidifier Bottle

Nasal Cannula

Manual

Appliance introduction:

Before using, please fill pour clear water into the moisture bottle about one third reaching the water line site.

DF-2 blind nut straw into bolt head, make the pipe of flow meter square water line.

Put off regulator (9), put on the oxygen tube switch, so you will see the data from the needle position of pressure gauge(2). At last, straw flow on/off at anti-clockwise according to patients

needs, adjust switch.

If a patient need oxygen for a long time, can use a nose pipe to help the patient absorb oxygen.

Moisture bottle (18) circles at clockwise, adjust (13) oxygen hole to other sites.

Attention point:

Before using the suction, you will check all parts bad or good, and clean it by drying cloth.

Pressure gauge (2), regulator (3) no oil, otherwise explode.

Clearwater in moisture bottle keep clean.

There is an adjustable nut(6) in front of plunder shall be straw at clockwise.

Relief valve(7) keeps out of danger.

Oxygen dosage is decided by the doctor.

After using suction, put off the oxygen tube switch, make rest oxygen out, pressure gauge to zero site, last put off the flow switch if using again, first put on the oxygen tube switch, avoid

exploding.
Item Code: SH.O.R Learn More

Lungciser – Respiratory Lung Exerciser

Intended Use

Intended use for increasing lung capacity.

Features and Benefits:

Provided with three color-coded balls Red, Yellow, Blue is specially designed three stages chamber 600 CC/Sec, 900 CC/Sec, 1200 CC/Sec respectively for efficient and stepwise monitoring of

improvements.

Made up of medical-grade Polycarbonate material.

Provide detachable parts helpful in cleaning and maintenance.

Provide with tube and mouthpiece to easily inspiration.

Non-Sterile.

Specifications:

REF/ART NO. VARIANT PACKING

INNER/OUTER UNIT

AR2001 Three Ball 1/30
Item Code: AR2001 Learn More

Diagnostic NANO

Compact nebulizer with optimum nebulization parameters to be used by the whole family.

- Easy to use

- Average particle size MMAD 2.44 micron

- Guaranteed quick inhalation process (6-7 min. for 2.5 ml of medicine)

- Ensured optimum use of the medicine

- Very quiet nebulizer operation

- Accessories for children and adults included

ADDITIONAL INFORMATION

TECHNICAL SPECIFICATION

Model Diagnostic NANO

Average particle size MMAD 2,44μm

Operating time 030 min. ON / 30 min. OFF

Amount remaining 0,15 ml

Medicine cup 8 ml

Noise level < 55 dBA

Weight Approx. 1,51 kg

Operating conditions Temp.: 10°C÷40°C,

Humidity: 10÷95%

Storage conditions Temp.: -20°C÷70°C,

Humidity: 10÷95%

Accessories 1 x Adult mask

1 x Pediatric mask

1 x Air tube

1 x Mouthpiece

1 x Nebulizer (Spray Nozzle)

5 x Air filter

Item Code: NANO Learn More

Contec’s CMS50D Pulse Oximeter is equipped with Photoelectric Oxyhemoglobin Inspection Technology to rapidly detect changes in your blood oxygen level. A finger oximeter, it also measures

your pulse rate. This device comes with 2 x AAA batteries with a power of 1.5V and can continuously work for 20 hours, ensuring that your device is always ready to measure readings. This is a non-

invasive portable oximeter that is ideal for home as well as professional use. It consumes less power, provides accurate results, and allows you to read your daily heartbeat and oxygen levels easily.

The oximeter is resistant to surrounding light and the deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.

Technical specifications:

Display Mode: 2.4 cm

SpO2 value display

Works on Photoelectric Oxyhemoglobin Inspection Technology

SpO2 Measuring Range: 0~100%

Screen Resolution: 128 x 64 pixels

PR Measuring Range: 30~250 bpm, (the resolution is 1bpm)

Accuracy: 70~100% ±2%

Accuracy: ±2bpm or ±2% (select larger)

Measurement Performance in Weak Filling Condition:

– SpO2 and pulse rate can be shown correctly when the pulse-filling ratio is 0.4%

– SpO2 error is ±4%

– Pulse rate error is ±2 bpm or ±2% (select larger)

Power Consumption: less than 30mA

Voltage: DC 2.6V~3.6V

Power Supply: 1.5V (AAA size alkaline batteries × 2)

Battery works: continuously for 20 hours

Safety Type: Interior Battery, BF Type

Displays the pulse rate value and a bar graph

Display of pulse: waveform

The display mode can be changed

The brightness of the screen can be changed

Low-voltage indication: low – the device indicates when the voltage is low before working

Features:

User-friendly and portable oximeter

Highly accurate device

Works on Photoelectric Oxyhemoglobin Inspection Technology

Non-invasive fingertip oximeter

Can be used in a professional or home setting

Product Specifications:

Brand Contec

Country of Origin China

Dimensions 5.7 x 3.1 x 3.2 cm

Battery 2 AAA (Not included)

Warranty 1 Year Brand Warranty

SKU SEN601-CONTEC-CMS50D

How to use Pulse Oximeter (CMS50D) – Contec:

To insert the batteries, slide the battery compartment lid open

Now place the two batteries supplied in the pulse oximeter and ensure that the correct battery polarity is observed

Close the battery compartment lid again

Press the white one-touch power/function button to start the device

Now Insert one finger into the finger opening of the pulse oximeter and hold it steady

Press the function button to start the pulse oximeter. Do not move during the measurement

Press the function button to start the pulse oximeter. Do not move during the measurement

Continue to press the function button, until your measurement values appear on the screen after a few seconds

Accessories:

Hanging rope

User manual
Item Code: CMS50D Learn More

night light makes it a modern decoration for your home or office.Ideal for baby-care also.

Specifications:

10 hours constant work time

Automatically switches off when water tank is empty (with just light alarm, no noise for quiet work)

360° rotation moisture outlet

Water tank volume: 0,8 L

Moisture capacity: 80 ml/h

Coverage area: 15 m2

With 7 Colors Night Light

Technical Properties:

Main voltage, frequency: AC 230V, 50Hz, DC 24V

Power: 12 W
Item Code: 1814 Learn More

“It is designed with oil free pump for environmental protection and low noise. ”

Overflow protection and inside bottle make compact design, lightweight, small size and is convenient for transportation and safe use.

Specification

Voltage: AC220V±10%, 50Hz±2% or AC110V±10%, 60Hz±2%

Noise: ≤65dB

Max negative pressure value: ≥0.075MPa

Pumping rate: ≥15L/min

Jug volume: 1000 ml

Continuous Working Time: 0-30 min

Packing

N.W/G.W: 5/ 6 KGS

Packing Dimension: 34.5*26*28.5 cm

Accessory:

Soft tube 1 pc, (2m long, 2mm thick, 12mm in diameter),

Suction tube 2 pcs, 55 cm per pc

1 for Adults | Size 12 (White)

1 for Children, | Size 8 (Blue)

Fuse 2 pcs, (1.5AAnd3A),

Filters 2 pcs
Item Code: 9E-A Learn More

Operation Model Continual

Control Panel Interface panel with on/off switch and alarm indicators

Liter Flow 0.5–5 L/min

Oxygen Concentration 93% ± 3% (1-5 LPM)

Time to Reach Pure Oxygen within 10 mints

Outlet Pressure 5.8~8.7 psi

Required Maintenance Compressor intake filter: change every 2 years

Compressor: every 25000 hours

Sound Level <42 dBA

OPI (Oxygen Percentage Indicator) Alarm Levels Yellow indicator with purity between 82% ±3%

Red indicator with purity of <72%

Tech. info requested User manual, Spare parts for after-sales.

Manufacturing standards(ISO 13485/CE 0434).

valve relief valve 36 +/-3 PSI

Power Supply Failure Alarm The Alarm Rings continuously and no LED is Illuminated.

Input Voltage 220±22V/50Hz

Average Power Consumption 270W(AVER)

Dimensions 59.2 X 38 X 23 cm

Weight 14.5 kg

Operating Temperature 5℃~40℃

Operating Humidity 30%~75%

Operating Altitude 0 to 2000 m

Storage/Transport Humidity ≤93%

Accessories Reusable Dust filter

Humidifier, Tube Connector

Power Cable

Package Dimension 64 X 46 X 34 cm

Certificated CE

Oxygen Concentrator Features:

1. Low noise

The loudest noise of the running oxygen concentrator is not more than 37 decibels, which is much closed to human’s breath-noise when sleeping. The research indicates that such noise is

acceptable for comfortable sleeping.

2. Stable performance

Oxygen concentrator has been proven as a reliable oxygen concentrator via the wide deployment in the market.

3. Lower power consumption

365 x 24 hours continues operation with stable performance

4. Warranty

1 years warranty for the whole device

MIC Medtech new model swing compressor oxygen concentrator CP503 for oxygen therapy at home

Why choose Medical’s Oxygen Concentrator

1. Low noise with lower than 37db, which won’t affect the user’s sleeping.

2. Stable performance, automatic molecular sieve bed filter system, ensure the efficient and precise oxygen extraction.
Item Code: CP503 Learn More

Operation Model Continual

Material Acrylic, Metal, plastic

Liter Flow 1–10 L/min

Oxygen Concentration 93% ± 3%

Operation Pressure 80 ± 6 KPa

Sound Level <52 dBA

Nebulization Flow ≥ 6 LPM

Nebulizer Particle Size ≤ 5 microns

Input Voltage 220±22V/50Hz or 60HZ

Average Power Consumption 560 W (average)

Dimensions 40 X 30 X 54 cm

Weight 21.5 kg

Certificated CE / ISO13485 / ISO9001 Product feature: High Oxygen Purity Compact Design, Lightweight Low Noise to Ensure Bedside Use 24/7 Continuous Operation Alarm System to Monitor the Device’s Operation LCD Display One Button Control Low Power Consumption Working principle: oxygen concentrator uses air as raw material and high-quality molecular sieve as adsorbent, and adopts the principle of pressure swing adsorption (PSA) to directly separate oxygen from nitrogen at normal temperature, oxygen of high purity is thereby produced. People who be suit for using oxygen concentrator: hospital equipment and machines - 10 Liter portable oxygen concentrator with lowest price Oxygen absorption can improve physical oxygen supply condition and achieve the purpose of oxygenating care. It is suitable for: Middle-aged and elderly People with poor physical fitness Pregnant women Students and other people who suffer different degrees of physiological hypoxia Eliminate fatigue and restore somatic function after heavy physical or mental exertion. Function: Big LCD display the total working hoursAndpresent working time Automatic alarm system: power failure alarm, low voltage alarm, low purity alarm. Overload protection to protect the machine. Advantage: Adopt PSA(pressure swing adsorption) technology Swiss imported sieve analysis Longer lifetime. lifespan is more than 10,000 hours, which is the twice of other’s low noise, noise is lower than 43db. Adopt multilayer noise reduction design. High purity oxygen 93%±3%,3 layers filter system to make sure high purity oxygen. machine starts fast, which can obtain high purity oxygen within 2 mins. hospital equipment and machines - 10 Liter portable oxygen concentrator with lowest price Power indicator (green light) Device is operating regulated Normal oxygen (green light) Oxygen purity is under normal condition Low oxygen (yellow light) Oxygen purity is below 85%, ASK FOR SERVICE Alarm (red light) TURN this device OFF and contract your device supplier for service immediately. Indicate the: condition of system pressure (lo-p/hi-p) condition of oxygen purity (lo-o2) heating condition (hi-t) total time that this device is operated lo-p/hi-p: low pressure / high pressure lo-o2: low oxygen purity hi-t: high temperature hospital equipment and machines - 10 Liter portable oxygen concentrator with lowest price hospital equipment and machines - 10 Liter portable oxygen concentrator with lowest price hospital equipment and machines - 10 Liter portable oxygen concentrator with lowest price
Item Code: CP101 Learn More